Arburg will be showing the hybrid high-performance Hidrive series on its stand no. 21B25 in Hall 2, with an Allrounder 520 H producing 32 pipette tips in around 6 s cycle time.

The hybrid Allrounder 520 H on show at Interplastica is equipped with a 32-cavity mold and produces pipette tips in a cycle time of around 6 s.

Spritzgießen

Kunststoffverarbeitung: Verfahren

Spritzgießmaschinen, allgemein

Kunststoffverarbeitung: Maschinen und Komponenten

Spritzgießmaschinen

High-Tech for Medical Technology

From 25 to 28 January, the OOO Engel team presents its booth in Moscow again. The injection molding machine manufacturer and system solution provider headquartered in Austria is making the huge potential of digital solutions tangible by producing technical parts live on a tie-bar-less victory injection molding machine.

Engel victory injection molding machines with tie-bar-less clamping units.

The Benefits of Tie-Bar-Less Technology

Paul Caprio has left Engel North America effective January 31st, 2022. Now the company presents the new management board.

Engel North America Management Board (left to right): Johann Dastl (CFO), Vanessa Malena (COO), Benjamin Lettner (CSO), Mark Sankovitch (CEO).

New Management Board at Engel North America

On 1 August 2022, Stalinjose Selvanayagam has taken up his position as Managing Director of the sales and service subsidiary of Engel in Mumbai.

Stalinjose Selvanayagam heads Engel‘s sales and service subsidiary in Mumbai as managing director.

16:9

Personalmanagement

Produktion

Stalinjose Selvanayagam is New Managing Director

By the end of the year, Germany‘s largest used injection molding machine will be on its way from southern Germany via Amsterdam to Mumbai. Gindumac organizes the complete logistic handling with the customer.

All components of the large machine, such as the plasticizing unit in the picture, have to be removed and packed for long distance transport to India

Komponenten für die Kunststoffverarbeitung

Gebrauchtmaschinenhandel

Dienstleistungen

Dienstleistungen in der Metallbearbeitung

Kunststoff-Verpackungsmaschine

Sondermaschinen

Gebrauchtmaschinen

Betriebstechnik für Kunststoffverarbeitung (Peripherie)

Gindumac Receives Big Order from India

The Wilhelm Böllhoff GmbH & Co. KG employs Arburg’s ALS host computer system as a uniform MES at locations all over the world. Not only all their injection molding machines are networked with information technology via ALS, but hundreds of machines and turnkey systems for metalworking and assembly, as well. Some 3000 injection molds are also managed. This generates transparency in everything from order planning and process optimization to maintenance.

The process status of every machine can be viewed via the ALS terminal

Böllhoff Uses ALS as a Uniform Global MES for Injection Molding and Metalworking

Big Data für die Qualitätssicherung

Industrie 4.0

Industrie 4.0 für die Qualitätssicherung

Qualitätssicherung Kunststoff

Qualitätssicherung

Energiemanagement

Energieeffizienz

Completely Joined to the Host Computer System

In cars, LEDs are taking over ever more applications and are increasingly used as differentiating design elements. In order to ensure a high luminous efficiency even with complex geometries and elongated structures, Engel has developed a new plasticizing process for manufacturing light guides.

The transformation of the automobile also strongly affects the vehicle interior. Light is gaining in importance as a design element

The Principle of Starve Feeding: Injection Molding Ultrahigh Purity Light Guides

Farbmessgeräte

Messtechnik

Optische Mess- und Prüftechnik

LED / OLED-Systeme und Faseroptik

Lichttechnik

Schnecken und Plastifiziersysteme

Less Granules  Stock Means More Quality

Munich-based mechanical engineering group KraussMaffei is repositioning itself and uniting all divisions under a single brand. At a time of accelerated technological change, the company is increasing its efforts to develop new products for digital solutions and new business models – and that includes plastics recycling.

Everything remains different: Dr. Frank Stieler, CEO of KraussMaffei

KraussMaffei Consolidates Three Divisions and the Previous Group Brands under a Single Brand

Extrusion

Doriat, Clemens, Dr.

Digitale Transformation

Wirtschaft

Innovationen und neue Technologie

Nachhaltigkeit

Umweltmanagement

Industrie 4.0 für die Kunststoffverarbeitung

Kunststoff-Recycling

Kunststoff-Aufbereitung

Ressourcenmanagement

Compoundieren

Moving with the Times

The injection molding system supplier Husky is launching its HyPET HPP5e. This is a refinement of the proven HPP platform, which, as a fully integrated system for the manufacture of PET preforms, is intended to obtain greater energy savings, system reliability, preform quality and user friendliness than its predecessor.

The HyPET HPP5e is claimed to achieve up to 7 % energy saving compared to the predecessor model

Husky: Advances in the Injection Molding of PET Bottle Preforms

Polybutylenterephthalat

Kunststoff Werkstoffe

Thermoplaste

Refining a Proven Platform

The new head of the Asia-Pacific region (excluding Greater China) will be responsible for sales, service and project management.

Spritzgießmaschinen, Spritzpressen

Kunststoffverarbeitungsmaschinen

Automatisierungstechnik

New Vice President of Asia-Pacific Region

A year to forget is nearing its completion. To brighten up this dreary fall season without a major event like Fakuma, injection molding machine builders have concocted various strategies.

Fig. 1. Ingrinder system solution: the sprue picker guides the removed sprue via vacuum conveyance to the integrated granulator

Injection Molding Machine Builders Are Discovering New Ways to Reach Their Customers

Vernetzung / Cloudlösung für die Kunststoffverarbeitung

Biokunststoffe

Schneidmühlen

Silikonkautschuk

Kautschuk / Elastomere

What Can You Do at Fall Fairtime,  When There Aren’t Any?

Once again, the K 2019 in Düsseldorf, Germany, lived up to its claim to be the leading trade show for plastics technology. At least in the field of injection molding, there were exciting global innovations to see – if you looked closely.

Fig. 1. Smart Operation – the machine is operated with only four buttons (© KraussMaffei)

Injection Molding Trends at K 2019

Schaumspritzgießen

Smart Factory

Mikrospritzgießen

Mehrkomponenten-Spritzgießen

Spritzgießwerkzeuge

Werkzeuge für die Kunststoffverarbeitung

Fließpressen

Handling, Handhabungstechnik für die spanende Fertigung

Handling, Handhabungstechnik

Spritzgieß-Sonderverfahren

Spritzgießsimulation

Software

Simulation

Elastomer-Spritzgießen

Linearroboter für die Kunststoffverarbeitung

Industrieroboter

Montagetechnik

Montage-Spritzgießen

Knickarmroboter

Co-Injektion (Barriere-/Sandwich-Spritzgießen)

Hybrid-Spritzgießen (Metall / Kunststoff)

Technical Excellence thanks  to Digital Assistance

The company Leonhard Kurz is a specialist in the development and production of decorative and functional coatings for plastics applications, which are applied by means of carrier foils during injection molding. Essential objectives of the company are technology and process development as well as the optimization of the 3D foil forming around corners and the contours of the plastic parts. For this purpose, Kurz operates an extensive injection molding technology center. New in the machinery: two production cells based on servo-hydraulic injection molding machines from Wittmann Battenfeld.

Decorative and functional coatings, such as those developed and produced at Leonhard Kurz in Nuremberg/Fürth, Germany, enable efficient implementation of new design concepts, shown here, for example on a car door panel with variable and dimmable backlighting

Leonhard Kurz Has Extended its Development Capacities with Injection Molding Systems from Wittmann Battenfeld.

Kapazitive Sensoren

Sensoren / Messwertaufnehmer

Folientechnik (IMD, IML, FIM, u.a.)

From the Roll to the Third Dimension

The required screw diameter can be ascertained on the basis of the shot volume. The formula for the average residence time can be used to estimate the degree of utilization and the thermal load on the material.

Various shapes of plasticizing screws. The correct design is approached in several steps

Part 1 of the Series Discusses the Basic Design of a Plasticizing Unit and the Correct Choice of Injection Unit

All about Plasticizing Screws

Wintec, a member of the ENGEL group of companies headquartered in Austria, is expanding sales of t-win injection moulding machines. By expanding into Europe, the Engel Group is consistently developing its two-brand strategy.

Now also available in Europe: the hydraulic t-win machines are characterised by high productivity, low energy consumption and a compact design

Wintec Starts Distribution in Europe 

Xiaojun Cui, CEO of KraussMaffei China, will take over the global management of the NM Division, Business, on July 1, 2022.

KraussMaffei announced the realignment of its New Machines (NM) Division: It will be split into Business and Operations. This is accompanied by a change in the management team.

KraussMaffei yesterday announced the realignment of its New Machines (NM) Division: It will be split into Business and Operations. This is accompanied by a change in the management team: Xiaojun Cui, CEO of KraussMaffei China, will take over the global management of the NM Division, Business, on July 1, 2022. He will also remain responsible for KraussMaffei China until further notice.

Lars Hoppe, currently Vice President Operations, will be responsible for NM global Operations. The previous Head of the NM Division, Dr. Volker Nilles, will leave the company on June 30, 2022. Xiaojun Cui and Lars Hoppe will both report to CEO Dr. Michael Ruf in their respective new positions as Executive Vice President.

The changes at the New Machines Division will see the following split as of July 1: NM Business will then comprise Sales, R&D and Order Engineering, Project Management and Application & Product Owner, and will be headed by Xiaojun Cui. Operations as well as Quality and Procurement will be headed by Lars Hoppe. CEO Dr. Michael Ruf: „The changes at the New Machines Division are aimed at making the entire KraussMaffei organization faster and more efficient worldwide, for example with regard to delivery times and cost structure. We want to use and utilize all of our locations in the best possible way for our business in order to be able to optimally serve our customers all over the globe.“

Xiaojun Cui has been responsible for KraussMaffei‘s business in China as CEO China since 2016. Prior to this, he held leading positions at companies such as Dresser-Rand and Honeywell Process Solutions. Xiaojun Cui has more than thirty years of experience in the fields of technology, project management and strategic consulting.

Lars Hoppe has been Vice President Global Operations at KraussMaffei since 2021. Previously, the mechanical engineer held management positions at companies such as Stratocon, Giesecke&Devrient and Dywidag Systems International. Hoppe has many years of experience in the areas of operations and supply chain management as well as the management of global production sites.

Commenting on the departure of Dr. Volker Nilles, CEO Dr. Ruf says: „We would like to thank Volker Nilles for his great commitment to our company. We wish him only the best for his future.“

KraussMaffei Technologies GmbH 

https://www.krauss-maffei.com

Xiaojun Cui: New Head of KraussMaffei’s New Machines Busines.

Lars Hoppe: New Head of KraussMaffei’s New Machines Operations

2022-06-21 - News KraussMaffei

issue 02/2023

issue 01/2023

issue 09/2022

About the journal

About the Journal

Contact

Media Data

Subscriptions

Subscription Offers

Subscription Cancellation

My Login

Imprint

Terms & Conditions

Terms and Conditions

Privacy Policy

News

Mobility

Packaging

Medical

Electrical/Electronics

Plastics Recycling

Lightweight Construction

Applications

Standard Thermoplastics

Engineering Plastics

High-Performance Plastics

Elastomers

Thermosets

Additives/Masterbatches

Bioplastics

Composites

Materials

Injection Molding

Additive Manufacturing

Further Processing Methods

Compounding

Composite Processing

Peripheral Equipment

Processing

Research & Development

Dissertations

Patents

Journal of Plastics Technology

HANSER

Career at HANSER

Publisher

Kunststoffe

FORM+Werkzeug

HANSER automotive

QZ Qualität und Zuverlässigkeit

WB Werkstatt + Betrieb

More Technical Portals

Publisher/Career

E-Paper

Subscription

Newsletter

Deutsch

Service Menu

linkedin